What is the biggest/smallest I can have my door?
Click here to view the full list of the maximum and minimum size for our doors.
Can I specify the size of glass on a Duramax door?
No, as the vision panels are made with special cassettes the size is not adjustable.
As Duramax vision panels are set sizes what are they?
The overall sizes (including beading) for Duramax doors (refer to end of the Duramax code):
AR24 – 240x520mm
AR11 and AR23 – 250x200mm
P1 – 965x610mm
AR9 and AR21 – 1268x250mm
AR10 – 1676x254mm
F4O/T and P2 – 960x250mm
Can I choose where the glass is located on a Duramax door?
Yes, if it is within the tolerances of the door i.e. not too close to the edge or too close to another vision panel or lock.
My frame is not square can I still use a Duramax door?
Yes, Duramax can be planed just like a timber door so if your frame is out of square you can take off a small amount from the required edge of the door.
How do I paint a Duramax door?
Click here to view painting instructions for a Duramax door.
Can you paint Duramax doors at Parkwood? Or do we have to paint it ourselves?
Yes, Parkwood can pre paint your chosen door. It’s best if we also machine it for hardware to avoid scratching the door further down the line.
Provide the brand, colour, and if possible the colour code/number.
(Please allow an extra 2 weeks leadtime if we are painting)
How can you tell which side the lock block is on a Duramax door?
There should be a sticker indicating the side of the lock block on the bottom of the door. If this is missing for some reason tap along on the door and you will be able to hear the difference and locate the lock block.
I just bought a Duramax door. How much can I trim off it?
General rule of thumb is 10mm off every edge can be taken off.
Can I choose the size of glass on an Aluminium door?
In most cases the size of glass changes with the size of the doors as the rails and stiles are a set size resulting in not being able to choose the glass size. The only exceptions are the CFLs with vision panels and the Thermtek TGV with vision panels; these doors you can request certain sized vision panels.
Can I have an Aluminium door wet sprayed?
Parkwood do not offer wet spraying of aluminium doors, but we can supply the door in a mill finish to be wet sprayed elsewhere.
Can I replace my old timber door with an Aluminium door?
Yes, providing the following conditions;
If the frame is timber, it needs to be square (you can’t alter the shape of an aluminium door). If the frame isn’t square, then a Duramax door (which can be trimmed) would be ideal.
If you are using standard 100x75mm hinges you can purchase hinge packers off us.
If the frame is aluminium you should be able to re use the hinges.
Do you make timber stable style doors?
Yes we do, although it does depend on the style of door whether it is possible.
If I supply the timber can you make the door?
No, we only use our 5 selected timbers: Cedar, Pine, Vulcan, American White Ash and Rosewood.
Do you make interior hollow core doors?
No, all are interior doors are made of solid timber (please note that paint quality doors contain customwood and stain quality doors may have veneer flat panels)
Do you make pre-hung interior doors?
No, we only supply the door panel.
Do Parkwood offer a measure and quote service?
No, we just manufacture the doors.
I have just recieced a quote for a Parkwood door and it says 'Machine for: Standard Lock Machining' what locks does this include?
Click here to view full list of what Parkwood consider a standard lock.
Can I buy direct off Parkwood?
As we are the manufacturer we do not sell direct to the general public, we work through a network of resellers. You can purchase through your local Bunnings or click here for local resellers in your area.
Can I open an account with Parkwood?
Yes, If you are one of the following:
Aluminium Fabricator, Timber Joiner, Door Prehanger, Door Reseller or Timber Merchant.
Please email us for account forms.